NETGEAR ReadyNAS 102, Hardware Manual

Page: 12 / 65

NETGEAR ReadyNAS 102
12
ReadyNAS OS 6 Desktop Storage Systems
Status Information
You can obtain information about the status of your storage system by reviewing the
indicators listed in the following table.
Table 1. ReadyNAS 102 indicator descriptions
Indicator Description
Power button and LED Press this button to turn on the ReadyNAS. The LED has these states:
•
Blinking . Booting or shutting down
•
On . Powered on
•
Off . Powered off
Disk LEDs (1, 2) Each disk bay has an LED associated with it on the front panel of the storage
system. The disk LEDs have these states:
•
On . Power is on and the disk is operating normally.
• Blinking . The disk was removed, failed, or is resynchronizing.
•
Off . The disk bay is empty.
Disk activity LED The disk activity LED has these states:
•
On . At least one disk is present.
•
Blinking . A disk is active.
• Off . No disks are present.
Rear panel Ethernet port
LEDs Two LED status indicators are built into this port, one green and one amber.
They indicate port speed and activity as follows:
•
Green on, amber off . 1000 Mbps connection speed, no activity
•
Green blinking, amber off . 1000 Mbps connection speed, activity
•
Green off, amber on . 10 Mbps or 100 Mbps connection speed, no activity
•
Green off, amber blinking . 10 Mbps or 100 Mbps connection speed, activity
• Green off, amber off . No connection
System Shutdown
You can shut down your storage system in these ways:
• Preferred shutdown . Press the Power button twice to initiate a graceful shutdown.
• Forced shutdown . If the storage system is not responding, unplug it.
• Using the ReadyNAS local admin page . For information about using the ReadyNAS
local admin page to shut down your storage system, see the ReadyNAS OS 6 Software
Manual , which is available at http://support.netgear.com/product/ReadyNAS-OS6.
If the power supply is interrupted due to a power failure, the system returns to its last state
once the power supply is restored:
• If the system was powered on at the time of the power failure, the system powers on
when the power supply is restored.