NETGEAR R6050 User Manual Download

Page: 79 / 157

Manage Your Network

AC750 Wireless Dual Band Gigabit Router R6050

View Router Status



To view router status and usage information:

Launch a web browser from a computer or WiFi device that is connected to the network.

Enter

http://www.routerlogin.net

http://www.routerlogin.com

A login screen displays.

Enter the router user name and password.

The user name is

admin

. The default password is

password

. The user name and

password are case-sensitive.

The BASIC Home screen displays.

Click the

ADVANCED

tab.

The Router Information pane displays the following information:

•

Hardware Version

. The router model.

•

Firmware Version

. The version of the router firmware. It changes if you upgrade the

router firmware.

•

GUI Language Version

. The localized language of the router user interface.

•

LAN Port

MAC Address

. The Media Access Control address for the Ethernet (LAN) port.

This address is the unique physical address that the Ethernet (LAN) port of the
router uses.

IP Address

. The IP address that the Ethernet (LAN) port of the router uses. The

default is 192.168.1.1.

DHCP Server

. Identifies whether the router’s built-in DHCP server is active for the

LAN-attached devices.

Summary of Contents for R6050






























































































































































Search results

Summary of Contents for R6050

Reviews:

Related manuals for R6050

Brands by name

Popular brands

NETGEAR R6050, User Manual

Search results

Summary of Contents for R6050

Reviews:

Related manuals for R6050

Brands by name

Popular brands