background image

12

 

¾

To access the USB storage device from a Mac: 

1.  Connect your USB storage device to the USB port on the 

router.
If your USB storage device uses a power supply, you must 
connect its power supply.
When you connect the USB storage device to the router’s USB 
port, it might take up to two minutes before it is ready for 
sharing. By default, the USB storage device is available to all 
computers on your local area network (LAN).

2.  On a Mac that is connected to the network, launch Finder and 

select 

Go > Connect to Server

.

The Connect to server screen displays.

3.  Enter the 

smb://readyshare

 in the 

Server Address

 field and 

click the 

Connect

 button.

4.  When prompted, select the 

Guest

 radio button.

If you set up access control on the router and you allowed your 
Mac to access the network, select the 

Registered User

 radio 

button and enter 

admin

 for the name and 

password

 for the 

password. For more information about access control, see the 
user manual, which is available online at  

http://downloadcenter.netgear.com

 or through a link in the 

router’s user interface.

5.  Click the 

Connect

 button.

A window displays the files and folders on the device.

Summary of Contents for Nighthawk X4























Reviews: