Use Ethernet port 1 to setup Multi-Gig Internet. For more information, see Get
Multi-Gig Internet With Internet Port Aggregation on page 31.
Use Ethernet ports 3 and 4 to cable a device that supports Ethernet port aggregation
to the router. For more information, see Ethernet Port Aggregation on page 89.
•
Multi-Gig Ethernet port 5. Use a Cat 5 Ethernet cable to connect a device, such as
a Multi-Gigabit Ethernet switch, that supports Gigabit Ethernet to your router. For
more information, see Set up the Multi-Gig port on your router on page 30.
•
Power On/Off button. Press the Power On/Off button to provide power to the
router.
•
DC power connector. Connect the power adapter that came in your product package
to the DC power connector.
Extend the antennas
Before you install your router, extend the antennas as shown in the following figure.
Figure 4. Position the antennas
User Manual
15
Hardware Setup
Nighthawk Tri-Band AX12 12-Stream AX WiFi Router
