NETGEAR Nighthawk RAX200 User Manual Download Page 45

Page: 45 / 175

Table 2. Common MTU sizes (Continued)

Application

MTU

Maximum size to use for pinging. (Larger packets are fragmented.)

1472

Used in some DHCP environments.

1468

Used in PPPoA environments.

1458

Used in PPTP environments or with VPN.

1436

Change the MTU size

To change the MTU size:

1. Launch a web browser from a computer or mobile device that is connected to the

router network.

2. Enter http://www.routerlogin.net.

A login window opens.

3. Enter the router admin user name and password.

The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.

The BASIC Home page displays.

4. Select ADVANCED > Setup > WAN Setup.

The WAN Setup page displays.

5. In the MTU Size field, enter a value from 64 to 1500.

6. Click the Apply button.

Your settings are saved.

User Manual

Specify Your Internet Settings

Nighthawk Tri-Band AX12 12-Stream AX WiFi Router

Summary of Contents for Nighthawk RAX200
















































































































































































Search results

Summary of Contents for Nighthawk RAX200

Reviews:

Related manuals for Nighthawk RAX200

Brands by name

Popular brands

NETGEAR Nighthawk RAX200, User Manual

Search results

Summary of Contents for Nighthawk RAX200

Reviews:

Related manuals for Nighthawk RAX200

Brands by name

Popular brands