NETGEAR Nighthawk RAX200 User Manual Download Page 175

Page: 175 / 175

Table 4. Router specifications (Continued)

Description

Feature

Compatible with 10BASE-T, 100BASE-TX, 1000BASE-T, or RJ-45

LAN

Compatible with 10BASE-T, 100BASE-TX, 1000BASE-T, or RJ-45

WAN

Compatible with 10BASE-T, 100BASE-TX, 1000BASE-T, or RJ-45

Multi-Gig port (2.5 Gbps)

Maximum WiFi signal rate complies with the IEEE

802.11 standard.

• 2.4 GHz AX: 4x4 (Tx/Rx) 1024 QAM 40 MHz, up to 1.2 Gbps

• 5GHz AX: 4x4 (Tx/Rx) 1024 QAM 160MHz, up to 4.8Gbps

• Backwards compatible with 802.11a/b/g/n/ac WiFi

WiFi

Auto Rate Sensing

Radio data rates

IEEE 802.11ax 2.4GHz 1024 QAM support
IEEE 802.11ax 5.0GHz 160MHz 1024 QAM support

Data encoding standards

Limited by the amount of WiFi network traffic generated by each node (typically
50–70 nodes).

Maximum computers per
wireless network

WPA2-PSK and WPA/WPA2

802.11 security

Maximum wireless signal rate derived from IEEE 802.11 specifications. Actual data throughput and wireless coverage

will vary and may be lowered by network and environmental conditions, including network traffic volume and building

construction. NETGEAR makes no representations or warranties about this product’s compatibility with AX standards.

User Manual

175

Supplemental Information

Nighthawk Tri-Band AX12 12-Stream AX WiFi Router

Summary of Contents for Nighthawk RAX200
















































































































































































Search results

Summary of Contents for Nighthawk RAX200

Reviews:

Related manuals for Nighthawk RAX200

Brands by name

Popular brands

NETGEAR Nighthawk RAX200, User Manual

Search results

Summary of Contents for Nighthawk RAX200

Reviews:

Related manuals for Nighthawk RAX200

Brands by name

Popular brands