Table 1. LED descriptions (Continued)
Description
LED and Button
Pressing this button for two seconds turns the 2.4 GHz and 5 GHz WiFi radios
on and off.
If this LED is lit, the WiFi radios are on. If this LED is off, the WiFi radios are turned
off and you cannot use WiFi to connect to the router.
WiFi/On/Off button and
LED
This button lets you use WPS to join the WiFi network without typing the WiFi
password. The WPS LED blinks white during this process and then lights solid
white.
WPS button and LED
Rear Panel
The following figure shows the rear panel connectors and buttons.
Figure 3. Rear panel
Viewed from left to right, the rear panel contains the following components:
•
Reset button. Pressing the Reset button resets the router.
If you press the Reset button for up to 30 seconds or until the Power LED starts
blinking amber, the routerreturns to its factory settings. For information about the
factory settings, see Factory Settings on page 199.
•
Ethernet ports. Four Gigabit Ethernet RJ-45 LAN ports. Use these ports to connect
the router to LAN devices.
User Manual
13
Hardware Setup
Nighthawk Pro Gaming Router