NETGEAR N750 User Manual Download Page 77

Page: 77 / 129

Administration

N750 Wireless Dual Band Gigabit Router WNDR4300

View Router Status

To view router status and usage information, select

Advanced Home

or select

Administration > Router Status

to display the following screen:

Router Information

Hardware Version.

The router model.

Firmware Version

. The version of the router firmware. It changes if you upgrade the router

firmware.

GUI Language Version

. The localized language of the user interface.

LAN Port

•

MAC Address

. The Media Access Control address. This is the unique physical address

that the Ethernet (LAN) port of the router uses.

•

IP Address

. The IP address that the Ethernet (LAN) port of the router uses. The default

is 192.168.1.1.

•

DHCP Server

. Identifies whether the router’s built-in DHCP server is active for devices on

the LAN.

Summary of Contents for N750


































































































































Search results

Summary of Contents for N750

Reviews:

Related manuals for N750

Brands by name

Popular brands

NETGEAR N750, User Manual

Search results

Summary of Contents for N750

Reviews:

Related manuals for N750

Brands by name

Popular brands