Advanced
94
Mobile Voice HSPA+ Broadband 11n Wireless Router MVBR1210C
To configure static routes:
1.
From the main menu, under Advanced, select
Static Routes
to view the Static Routes
screen.
2.
Select the radio button of the static route you want to configure.
3.
Click
Add
or
Edit
to display the following screen:
4.
Fill in or change the fields:
•
Route Name
.
The route name is for identification purposes only.
•
Private
. Select this check box if you want to limit access to the LAN only.
The static route will not be reported in RIP.
•
Active
. Select this check box to make this route effective.
•
Destination IP Address
and
IP Subnet Mask
. Type the destination IP address of the
final destination. If the destination is a single host, type a subnet value of
255.255.255.255
.
•
Gateway IP Address
. This needs to be a router on the same LAN segment as the
router.
•
Metric
. Type a number between 2 and 15. This represents the number of routers
between your network and the destination. Usually, a setting of 2 or 3 works, but if this
is a direct connection, set it to 2.
5.
Click
Apply
to save your changes. If you added a static route, it is added to the Static
Routes screen.
