Advanced
77
Mobile Voice HSPA+ Broadband 11n Wireless Router MVBR1210C
Advanced Wireless Settings
From the main menu, select
Advanced Wireless Settings
to display the following screen:
Field
Description
Enable Wireless Router Radio
Selected by default, this setting enables the wireless radio, which
allows the router to work as a wireless access point.
Turning off the wireless radio can be helpful for configuration,
network tuning, or troubleshooting.
Enable SSID Broadcast
The router broadcasts its wireless network name (SSID).
Fragmentation Length, CTS/RTS
Threshold, and Preamble Mode
These should be left at their default settings.
Router’s PIN
The PIN number used for Push 'N' Connect.
Disable Router’s PIN
By default, this check box is cleared. This allows the WPS clients to
discover the router’s PIN.
Keep Existing Wireless Settings
By default, this check box is cleared. This allows the router to
automatically generate the SSID and WPA/WPA2 security settings
when it implements WPS. After WPS is implemented, the router
automatically selects the Keep Existing Wireless Settings check box
so that your SSID and wireless security settings remain the same if
other WPS-enabled devices are added later.
Set Up Access List
Access control is disabled by default so that any computer
configured with the correct SSID can connect. See
Restrict Access
by MAC Address
on page
78.
Wireless Station Access Control
By default, any wireless computer configured with the correct SSID and wireless security
settings is allowed access to your wireless network. You can use wireless access point
settings in the Wireless Settings screen to further restrict wireless access to your network:
