12
|
Chapter 1: Getting Acquainted
NETGEAR Stora User Manual
Figure 3 Stora Rear Panel
LED and Connector Descriptions
The function of each Stora item is described in the following table:
Item
Activity
Description
Power
Button
Push button on
back of unit to turn
the on and off.
Turn on Stora
: Press once.
Turn off Stora
: To correctly shutdown your Stora, press and
hold the power button for about 5 seconds. The blue light on
the front panel will blink before shutting off. If the unit is hung,
press and hold the power button to force shutdown.
NOTE
: To save power, your Stora will automatically go into
disk spin down mode when not used for 12 minutes.
Power
Status LED
LED located on
front of unit
Solid Blue
: Power is on.
Blinking Blue
: The Stora is booting up or shutting down.
No LED light
: The system is powered off.
Disk 1: Top
Disk 2:
Bottom
LEDs
LED status
indicators for Disk
1 and Disk 2
located on front of
unit.
On
: Disk installed
Solid Green
: Drive is operating normally.
Blinking Green
: The Stora is booting up or shutting down.
Also indicates activity such as copying data.
Solid Amber
: Drive is not ready, however, if solid amber
constantly, it indicates a problem with the drive.
Troubleshooting tips - try one or more of the following:
•
check that cables are securely connected and power is on.
•
remove and then reinsert the disk.
•
turn off Stora and turn it on again to reboot the system.
Off: No disk installed.
1. Disk
3. Power button
5. Ethernet port
4. Power
6. Reset button
cable socket
release
latches
2. Serial numbers
