manualshive.com logo in svg

NETGEAR MBR1200, User Manual

Share
Download
NETGEAR MBR1200 User Manual Download Page 64

64

   

|   

Chapter 5:  Advanced  

Mobile Broadband 11n Wireless Router MBR1000 User Manual 

To restrict access based on MAC addresses:

1. 

From the main menu, under Advanced, select Wireless Settings. Click 

Setup Access 

List

 to display the Wireless Station Access List screen.

2. 

Adjust the list as needed for your network. You can add devices to the Trusted Wireless 

Stations list. Click 

Add

 to display the following screen:

3. 

You can add devices to the list using either of the following methods: 

•     

If the computer is in the Available Wireless Cards table, select its radio button to 

capture its MAC address.

•     

Use the Wireless Card Entry fields to enter the MAC address of the device to be 

added. The MAC address can usually be found on the bottom of the wireless device. 

•     

If no device name appears when you enter the MAC address, you can type a 

descriptive name for the computer that you are adding.

4. 

Click 

Apply

 to save these settings. Now, only devices on this list will be allowed to wirelessly 

connect to the router.

Summary of Contents for MBR1200













































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands