manualshive.com logo in svg

NETGEAR MBR1200, User Manual

Share
Download
NETGEAR MBR1200 User Manual Download Page 27

  Chapter 2:  Wireless Network Configuration    

|

    

27

Mobile Broadband 11n Wireless Router MBR1000 User Manual 

Manually Configuring Your Wireless Settings

Note:  

If you use a wireless computer to change the wireless network 

name (SSID) or wireless security, you will be disconnected when 
you click 

Apply

. To avoid this problem, connect your computer to the 

router with an Ethernet cable while you are making changes.

To view or manually configure the wireless settings:

1. 

Log in to the router as described in 

Logging In to Your Router 

on page 11.

2. 

Select Wireless Settings from the main menu.

The settings for this screen are explained in 

Table 6

.

3. 

Select the region in which the router will 

operate. 

4. 

For initial configuration and test, leave the other 

settings unchanged. 

5. 

To save your changes, click 

Apply

.

6. 

Configure and test your computers for wireless 

connectivity.

Set up your wireless computers with the 
same SSID and wireless security settings as your router. Check that they have a wireless 
link and are able to obtain an IP address by DHCP from the router. If there is interference, 
adjust the channel.

Table 6.  Wireless Settings 

Settings

Description

Wireless 
Network

Name (SSID)

The SSID is also known as the wireless network name. Enter a 
32-character (maximum) name in this field. This field is 
case-sensitive. 
When there is more than one wireless network, SSIDs provide a 
means for separating the traffic. To join a network, a wireless 
computer or device must use the SSID.

Region

The location where the router is used.

Channel

The wireless channel used by the gateway. The default is 

Auto

.

Do not change the channel unless you experience interference 
(shown by lost connections or slow data transfers). If this happens, 
you might need to try different channels to see which works best. 

Mode

The default is 

Up to 145 Mbps

.

Summary of Contents for MBR1200













































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands