background image

  Chapter 3:  Content Filtering    

|

    

39

Mobile Broadband 11n Wireless Router MBR1000 User Manual 

Blocking Sites and Keywords

The router provides a variety of options for blocking Internet-based content and 
communications services. With its content filtering feature, the router prevents objectionable 
content from reaching your PCs. You can control access to Internet content by screening for 
keywords within Web addresses. Content filtering options include:

•     

Keyword blocking of HTTP traffic.

•     

Outbound service blocking. Limits access from your LAN to Internet locations or services 
that you specify as off-limits.

•     

Denial of service (DoS) protection. Detects and thwarts DoS attacks such as Ping of 

Death, SYN flood, LAND attack, and IP spoofing.

•     

Blocking unwanted traffic from the Internet to your LAN.

The router allows you to restrict access to Internet content based on Web addresses and 
Web address keywords. 

1. 

Log in to the router as described in 

Logging In to Your Router 

on page 11.

2. 

On the main menu, select Block Sites to display the Block Sites screen:

3. 

To enable keyword blocking, select one of the following:

•     

Per Schedule

. Turn on keyword blocking according to the settings on the Schedule 

screen.

•     

Always

. Turn on keyword blocking all the time, independent of the setting in the 

Schedule screen.

4. 

Enter a keyword or domain in the 

Keyword

 field, click 

Add Keyword

, and then click 

Apply

Summary of Contents for MBR1200













































































































Reviews: