Managed Stackable Layer 3 Switches GSM7328S, GSM7352S and GSM7328FS Hardware Instal-
Introduction
2-9
v1.0, February 2007
GSM7328FS Rear Panel
The rear panel has two module bays, a console port, redundant power supply
connector, and a standard AC power receptacle for the supplied power cord. The
module bays support any combination of either the ProSafe 10-Gigabit Ethernet
XFP Adapter (AX741) or the ProSafe 24-Gigabit Stackable Module (AX742).
Figure 2-6
4-10GbE interface
Module
One LED /module
XFP Module Present or Stacking Adapter Present & ACT
LED :
XFP Module Present LED /ACT:
•
Off
: 10GbE adapter absent
•
Solid Green
: 10GbE adapter present
•
Blinking Green
: Packet transmission or reception is occurring
on the port
Stacking Adapter Link/ACT LED
•
OFF
: Stacking module absent
•
Solid Green
: Stacking module present
•
Blinking Green
: Packets transmission or reception is
occurring on the port
RPS LED
•
Solid Green
: NETGEAR RPS Bank connected (Using internal
Power)
•
Solid Yellow
: The Switch internal power has failed or been
disconnected , but the RPS is providing power to switch
•
Blinking Yellow
: RPS unit is present but the power has failed.
•
Off
: NETGEAR RPS Bank Disconnected.
Table 2-3. LED Descriptions for GSM7328FS (continued)
LED
Description
Power receptacle
Console
Stacking/XFP
Redundant
power supply
module bays
connector
