Managed Stackable Layer 3 Switches GSM7328S, GSM7352S and GSM7328FS Hardware Instal-
Introduction
2-3
v1.0, February 2007
M1, M2, M3, M4
High-Speed I/O
Modules
(1 LED per
module)
XFP Module present or Stacking Adapter present and ACT LED:
XFP Module present LED /ACT
•
Off:
The 10GbE Adapter is not present.
•
Solid green
: The 10GbE Adapter is present.
•
Blinking green:
Packets transmission or reception is occurring on
the port
Stacking Adapter Link/ACT LED
•
Off
: Stacking module is not present .
•
Solid green:
Stacking module is present .
•
Blinking green:
Packets transmission or reception is occurring on
the port .
10/100/1000M
Ports
(2 LEDs per port)
Link/ACT LED
•
Off:
No link is established on the port.
•
Solid green:
A valid link is established on the port.
•
Blinking green:
The port is sending or receiving packets.
SPD LED
•
Off:
No link or a valid 10M link is established on the port.
•
Solid yellow:
A valid 100 Mbps link is established on the port.
•
Solid green
: A valid 1000 Mbps link is established on the port.
Note:
If port 21–24 media is changed to SFP, the RJ-45 LEDs l
change to OFF status.
SFP Ports
(1Link/ACT LED
per port)
•
Off:
No SFP module link is established on the port.
•
Solid green:
A valid SFP module link is established on the port.
•
Blinking green:
The port is sending or receiving packets.
Note.
If port 21–24 media is changed to copper, the SFP LEDs
change to OFF status.
Table 2-1. LED Descriptions for GSM7328S (continued)
LED
Description
