Managed Stackable Layer 3 Switches GSM7328S, GSM7352S and GSM7328FS Hardware Instal-
2-6
Introduction
v1.0, February 2007
GSM7352S Rear Panel
The rear panel has four module bays, a redundant power supply connector, a
console port, and a standard AC power receptacle for the supplied power cord.
The module bays support any combination of either the ProSafe 10-Gigabit
Ethernet XFP Adapter (AX741) or the ProSafe 24-Gigabit Stackable Module
(AX742). See “High-Speed I/O Module Bays” in Chapter 3.
M1, M2, M3, M4
High-Speed I/O
Modules
(1 LED per
module)
XFP Module present or Stacking Adapter present and ACT LED
XFP Module present LED /ACT
•
Off:
The 10GbE Adapter is not present.
•
Solid green:
The 10GbE Adapter is present.
•
Blinking green:
Packets transmission or reception is occurring on
the port.
Stacking Adapter Link/ACT LED
•
Off:
Stacking module is not present .
•
Solid green:
Stacking module is present .
•
Blinking green
: Packets transmission or reception is occurring on
the port.
SFP ports
• Link/ACT LED
•
Off:
No SFP module link is established on the port.
•
Solid green:
A valid SFP module link is established on the port.
•
Blinking green:
The port is sending or receiving packets.
Note:
If port 41~48 media is changed to copper, the SFP LEDs
change to OFF status.
Figure 2-4
Table 2-2. GSM7352S LED Description (continued)
LED
Description
Power receptacle
Console
Stacking/XFP
Redundant
power supply
module bays
connector
