Model FVS328 ProSafe VPN Firewall with Dial Back-up Reference Manual
Connecting the FVS328 to the Internet
3-13
May 2004, 202-10031-01
Testing Your Internet Connection
After completing the Internet connection configuration, your can test your Internet connection.
Log in to the firewall, then, from the Setup Basic Settings link, click the Test button. If the
NETGEAR Web site does not appear within one minute, refer to
Chapter 9, Troubleshooting
.
Your firewall is now configured to provide Internet access for your network. Your firewall
automatically connects to the Internet when one of your computers requires access. It is not
necessary to run a dialer or login application such as Dial-Up Networking or Enternet to connect,
log in, or disconnect. These functions are performed by the firewall as needed.
To access the Internet from any computer connected to your firewall, launch a browser such as
Microsoft Internet Explorer or Netscape Navigator. You should see the firewall’s Internet LED
blink, indicating communication to the ISP. The browser should begin to display a Web page.
The following chapters describe how to configure the advanced features of your firewall, and how
to troubleshoot problems that may occur.
Summary of Contents for FVS328 - ProSafe VPN Firewall
Page 4: ...May 2004 202 10031 01 iv...
