background image

Model FVS328 ProSafe VPN Firewall with Dial Back-up Reference Manual

Networks, Routing, and Firewall Basics

C-11

May 2004, 202-10031-01

What is a Firewall?

A firewall is a device that protects one network from another, while allowing communication 
between the two. A firewall incorporates the functions of the NAT router, while adding features for 
dealing with a hacker intrusion or attack. Several known types of intrusion or attack can be 
recognized when they occur. When an incident is detected, the firewall can log details of the 
attempt, and can optionally send e-mail to an administrator notifying them of the incident. Using 
information from the log, the administrator can take action with the ISP of the hacker. In some 
types of intrusions, the firewall can fend off the hacker by discarding all further packets from the 
hacker’s IP address for a period of time.

Stateful Packet Inspection

Unlike simple Internet sharing routers, a firewall uses a process called stateful packet inspection to 
ensure secure firewall filtering to protect your network from attacks and intrusions. Since 
user-level applications such as FTP and Web browsers can create complex patterns of network 
traffic, it is necessary for the firewall to analyze groups of network connection "states." Using 
stateful packet inspection, an incoming packet is intercepted at the network layer and then 
analyzed for state-related information associated with all network connections. A central cache 
within the firewall keeps track of the state information associated with all network connections. 
All traffic passing through the firewall is analyzed against the state of these connections in order to 
determine whether or not it will be allowed to pass through or be rejected.

Denial of Service Attack

A hacker may be able to prevent your network from operating or communicating by launching a 
Denial of Service (DoS) attack. The method used for such an attack can be as simple as merely 
flooding your site with more requests than it can handle. A more sophisticated attack may attempt 
to exploit some weakness in the operating system used by your router or gateway. Some operating 
systems can be disrupted by simply sending a packet with incorrect length information.

Summary of Contents for FVS328 - ProSafe VPN Firewall





































































































































































































































Reviews: