NETGEAR VPN Client to NETGEAR the FVS328
H-1
May 2004, 202-10031-01
Appendix H
NETGEAR VPN Client
to NETGEAR the FVS328
Follow these procedures to configure a VPN tunnel from a NETGEAR ProSafe VPN Client to an
FVS328. This case study follows the Virtual Private Network Consortium (VPNC) interoperability
profile guidelines. The menu options for the FVS328, FVL328, and FWAG114 are the same.
Profile: Traveling User or Telecommuter at Home
The configuration in this document follows the addressing and configuration mechanics defined
by the VPN Consortium. Gather all the necessary information before you begin the configuration
process. Verify whether the firmware is up to date, all of the addresses that will be necessary, and
all of the parameters that need to be set on both sides. Check that there are no firewall restrictions.
Table H-1.
Summary
VPN Consortium Scenario:
Scenario 1
Type of VPN
PC/Client-to-Gateway
Security Scheme:
IKE with Preshared Secret/Key (not Certificate-based)
Date Tested:
December 2003
Model/Firmware Tested:
Gateway
NETGEAR FVS328 firmware v 1.0
Client
NETGEAR ProSafe VPN Client v10.1
IP Addressing:
Gateway Static
IP
Address
Client Dynamic
Summary of Contents for FVS328 - ProSafe VPN Firewall
Page 4: ...May 2004 202 10031 01 iv...
