1-1
v1.0, October 2008
Chapter 1
Introduction
The NETGEAR Layer 2+ Managed Stackable Fast Ethernet Switch is a state-of-the-art, high-
performance, IEEE-compliant network solution. It includes powerful management features that
you can use to eliminate bottlenecks, boost performance, and increase productivity.
This guide describes hardware installation and basic troubleshooting for the following NETGEAR
switches:
•
ProSafe™ 24-Port L2+ Managed Stackable Switch with 2 Gigabit ports FSM7226RS
•
ProSafe™ 48-Port L2+ Managed Stackable Switch with 2 Gigabit ports FSM7250RS
These switches can be free-standing, or rack-mounted in a wiring closet or an equipment room.
For information about features for each product, see the NETGEAR website at
http://www.netgear.com
.
FSM7226RS Front Panel and LEDs
The following figure shows the front panel of the managed switch. The front panel contains LEDs,
a RST (reset) button, RJ-45 jacks, and copper/fiber combo ports.
Copper/fiber
RJ-45 jacks
Reset
combo ports
button
LEDs
Figure 1-1