Defining General QoS Settings
The
CoS Page
contains information for enabling QoS globally and on specific interfaces. After QoS has been configured, the original device QoS
default settings can be reassigned to the interface in the
CoS Page
.
To enable QoS:
1. Click
QoS > General > CoS
. The
CoS Page
opens:
Figure 5 - 42: CoS Page
The
CoS Page
contains the following:
•
Unit No.
— Displays the stacking member for which the QoS information is displayed.
•
CoS Mode
— Determines whether QoS is enabled on the device. The possible values are:
–
Enable — Enables QoS on the interface.
Page 79
