Figure 5 - 25: Modify Port Configuration Page
In addition to the fields in the
Interface Configuration Page
, the
Modify Port Configuration Page
includes the
Reactivate Suspended Port
field.
3.
Define the fields.
4. Click
. The parameters are saved and the device is updated.
Defining LAG Members
Link Aggregation optimizes port usage by linking a group of ports together to form a single LAG. Aggregating ports multiplies the bandwidth
between the devices, increases port flexibility, and provides link redundancy. Ports added to a LAG lose their individual port configuration. When
ports are removed from the LAG, the original port configuration is applied to the ports. Ensure the following when configuring LAGs:
•
All ports within a LAG must be the same media type.
•
A VLAN is not configured on the port.
•
The port is not assigned to a different LAG.
•
Auto-negotiation mode is not configured on the port.
•
The port is in full-duplex mode.
•
All ports in the LAG have the same ingress filtering and tagged modes.
•
All ports in the LAG have the same back pressure and flow control modes.
•
All ports in the LAG have the same priority.
•
All ports in the LAG have the same transceiver type.
Page 57
