•
IP Address
—Defines the interface used to manage the device.
•
Subnet mask
— Displays the currently configured IP address mask.
•
Gateway
—
Defines the default gateway IP address.
2.
Define the fields.
3. Click
. The IP configuration fields are saved and the device is updated.
Configuring ARP
The
Address Resolution Protocol
(ARP) converts IP addresses into physical addresses, and maps the IP address to a MAC address. ARP allows a
host to communicate with other hosts only when the IP address of its neighbors is known. To define ARP information:
1. Click
IP Addressing > ARP
. The
ARP Page
opens:
Figure 5 - 35: ARP Page
The
ARP Page
contains the following fields:
•
ARP Entry Age Out
—
Specifies the amount of time (in seconds) that passes between
ARP Table
entry requests. Following the
ARP Entry
Age
period, the entry is deleted from the table. The range is 1 - 40000000. The default value is 60000 seconds.
•
Clear ARP Table Entries
—
Specifies the types of ARP entries that are cleared. The possible values are:
–
None
— Maintains the ARP entries.
–
All
— Clears all ARP entries.
–
Dynamic
— Clears only dynamic ARP entries.
–
Static
— Clears only static ARP entries.
•
ID
—
Displays the
ARP Table
entry number.
Page 68
