V100LS User Guide
YML739Rev1
26
www.netcomm.com.au
Status:
Indicates whether you have registered with MyNetFone's service.
Connection Mode:
PPPoE / DHCP / Fixed IP - The V100 ATA is setup as a DHCP
client by default.
IP Address:
The IP address of the V100 ATA. If you have a DHCP server
running on your modem/router, the address indicated has been
assigned by this service. If you use a Fixed IP Connection Mode
this address is manually set by you.
Subnet Mask
The subnet mask of the V100 ATA.
Default Gateway:
The gateway's address through which the V100 ATA communi-
cates with the Internet. This is usually your modem / router.
DNS 1:
The Domain Name Service that the V100 ATA uses to resolve
domain names to IP addresses. This is usually your modem /
router.
DNS 2:
The Domain Name Service that the V100 ATA uses to resolve
domain names to IP addresses. This is usually your modem /
router. DNS 2 can be a different address to DNS 1 to provide a
backup DNS server if DNS 1 fails.
MAC Address:
The unique hexadecimal hardware address of the V100 ATA's
NIC (Network Interface Card). This cannot be modified.
Status:
Indicates whether a connection has been established with the
MyNetFone service.
