134
NetComm Wireless Light Industrial M2M Router Plus
www.netcommwireless.com
Technical data
The following table lists the hardware specifications of the NWL-15.
COMPONENT
SPECIFICATION
Memory
256MByte Flash memory storage (~120MB available on board space for user storage)
Operating System
Embedded Linux 3.6
Cellular bands
CDMA (BC0/BC1), 800/1900MHz
Maximum Data
Throughput / 3G
Radio interface
EV-DO Rev.A data rates: FL max. 3.1Mbps, RL max. 1.8Mbps
1xRTT Advanced data rates: FL max. 307.2kbps, RL max. 307.2kbps
Connectivity
1x (RJ-45) 10/100Base-TX Port with Auto MDIX
1x RS232 Serial Port DB-9 female DCE supporting either 9 wire RS232 or RS422 (software selectable) Software controlled termination
resistors for RS485
Mini USB 2.0 OTG interface with 0.5A supply capability
3 x Multipurpose I/O pins
Antenna
connectors
2x SMA connectors for cellular (1x Main and 1x RX Diversity)
1x SMA connector for GPS
LED Indicators
7x tri-colour LEDs. Power, Network and 5x Signal Strength indicators
GPS
Embedded GPS receiver (1575.42Mhz)
Active antenna voltage: 3.05V
Maximum current: 50mA
Tracking sensitivity under open sky: -159dBm
Acquisition sensitivity under open sky: -149dBm
Cold start sensitivity: -145dBm
Time to first fix (TTFF): Cold 25s, Warm 10s, Hot 3s
Short circuit protection
Supports NMEA-0183 (v2.3)
Redirect NMEA stream to serial for forward over IP
Odometer reading available via Web-UI, CLI and SDK
Operating
Temperature
Operating Temperature Range: -20°C ~ +65°C
Storage Temperature Range: -30°C ~ +80°C
Power input
Power input and I/O’s via 6 way termination block receptacle
Field terminable power input via screw type terminal block included
DC Power (8 - 40V DC)
Vehicle compatible protection on DC Input Jack. (ISO7637 standard)
Recommended power input rating of 6W via DC terminal block (e.g 12V 1.5A)
Dimensions &
Weight
135mm (L) x 101mm (W) x 29mm (D) / 180g
Regulatory
Compliance
FCC
Table 37 - Technical Specifications of the NWL-15 router
