NetComm NCT-1000 User Manual Download Page 5

Page: 5 / 139

NCT-1000/NCT-1020 User Guide

YML836 Rev2

Chapter 1

System Description

1.1 Features

The NCT-1000/NCT-1020 DSL Access Concentrator includes the following features:

• 10/100/1000 Mbps Ethernet WAN interfaces (for 1000Mbps – optical interface available)

• 802.1d Spanning Tree Algorithm

• 802.1p Priority Queuing (2 priority queues) for QoS

• 802.1q Tagged VLAN

• 802.3ad Link Aggregation to provide load sharing and fail over protection

• Broadcast storm control

• Suitable for MTU/MDU/MHU applications, and for co-location application in the central ofﬁce

• Shelf extension via an Ethernet interface

• MAC ﬁltering (up to 5 MAC addresses) & IP ﬁltering (up to 5 IP addresses) for security

• IGMP snooping for multicast services

• PPPoE & Web authentication pass-through

• Remote conﬁguration backup/restoration and ﬁrmware upgrade

• Local management via the console port

• Supports SNMP, and Telnet for network management

• Management tools: MCID* and optional CT-NM plus**

• POTS Splitter shelf for voice service is available

• Compatible ADSL and SHDSL modems/routers are available

• 19-inch Rack-mountable

• Easy installation/conﬁguration/maintenance

* MCID (Management Craft Interface Device) is a GUI management tool. It is put on the CD-ROM along

with the AMCU package.

** CT-NM Plus: Node Topology Management System.

1.2 xDSL CPEs

There are several types of NetComm’s xDSL CPEs, which meet the different demands of CPE users.

Note:

For more information on the xDSL CPEs, please visit www.netcomm.com.au

Summary of Contents for NCT-1000












































































































































Search results

Summary of Contents for NCT-1000

Reviews:

Brands by name

Popular brands

NetComm NCT-1000, User Manual

Search results

Summary of Contents for NCT-1000

Reviews:

Brands by name

Popular brands