30
NCT-1000/NCT-1020 User Guide
YML836 Rev2
Connection on the Power supply:
+V:
Connect the positive power lead to the positive terminal V.
-V:
Connect the negative power lead to the terminal marked –V.
Warning: The power connectors must be connected correctly. One connector should be con-
nected to the negative terminal on both the shelf and power supply; the other should be
connected to the positive terminal on both the shelf and power supply.
STEP 3:
Connect the AC source
To connect to the power source, use the AC power cord (one end with power plug and one end with three
wires).
Connection on the power supply
Use the AC power cord (the end with three wires) to connect to the power supply as follows.
L terminal of the power-supply:
Connect to the
Blue
wire.
N terminal of the power-supply:
Connect to the
Brown
wire.
FG terminal of the power-supply:
Connect to the
Green
-
Yellow
wire.
Connection to Power source
Connect the power plug to the power source.
STEP 4:
Turn on the power for the system. The corresponding power LED on the front-panel will light up.
If it is a single power system, only the connected power terminal LED will light up. If it is a dual
power supply system, both of the LEDs should light up.
Summary of Contents for NCT-1000
