NCT-1000/NCT-1020 User Guide
25
YML836 Rev2
Applying the core to the Gigabit Ethernet cable
The core for Gigabit Ethernet cable is black and round in shape.
STEP 1
Select the place on the cable where you will attach the core. The core should be placed near
the NCT-1000/1020 IP DSLAM, about 1-2 cm.
STEP 2
Loop the cable around the core twice, as displayed below.
STEP 3
Lock the core by fastening the clip. The following picture shows the RJ45 core.
Applying the core to the RJ21 connector (male Telco 50) cable
Both the telco-50 cable for the channel card and Gigabit Ethernet cable need a core. The correct core is
round and black.
STEP 1
Select the place on the cable where you will attach the core. The core should be placed about
1-2cm from the telco-50 connector.
STEP 2
Put the core around the cable as follows.
STEP 3
Lock the core by fastening the clip. Use Electrical Tape to wrap the core in case the core is
loose. The following displays the finished core application for the telco 50 cable.
Summary of Contents for NCT-1000
