NCT-1000/NCT-1020 User Guide
33
YML836 Rev2
2.10.3 Setting up Network Management
The following diagram shows the network management.
Figure 2-5 Network Management
You can connect the AMCU Ethernet port and the computer together for management over the Ethernet
network. After finishing the connection, make sure that the IP address of your computer for network manage-
ment and the IP address of the AMCU are in the same network segment. The factory-defaulted IP address for
the AMCU is 172.16.7.100 and subnet 255.255.0.0
The IP address of AMCU can be checked through the console via CLI command “show mcu config”.
Summary of Contents for NCT-1000
