48
NCT-1000/NCT-1020 User Guide
YML836 Rev2
5.1.2 Administration
To access the configuration screen, click on the Configuration tab, and the screen will display as below:
SNMP
The following parameters can be configured, click on the Set button to update settings:
MIB Version:
Displays the MIB version of the SNMP.
Trap IP address:
Sets up the IP address to which the CID will send a TRAP.
Get Community String:
Enter a string for accessing CID GET functions. The system default is public.
Set Community String:
Enter a string for accessing CID SET functions. The system default is private.
Trap Community String:
Enter a string for accessing CID functions for setting Traps.
User Account
The User Account screen is used to set up the user name and password. There are five user accounts that
can be set up to access the system. Among the five users, one is the super user, who has the authority to
configure, change parameters, monitor, and read the performance and status of the system.
The other four are Users that can read the status and parameters as well as display the system performance
statistics. A User has read-only access. To set up a password complete the following fields, and then press
the Set button:
Select a user: Select root to set up an administrator’s account or User to set a user’s account.
Input new user name:
Type the username.
Input new Password:
Type the password.
Retype new password:
Re-type the password.
Summary of Contents for NCT-1000
