YMLO-3G3WV
NetComm MyWay – 3G WiFi Router with Voice User Guide
www.netcomm.com.au
29
NETCOMM MYWAY
- 3G WiFi Router with Voice
5.3.2 Advanced
This page allows you to modify the advanced wireless settings for your MyWay. These settings should not be changed unless you are
aware of what effect they will have.
Beacon Interval:
Interval of time in which the wireless router broadcasts a beacon which is used to synchronize the wireless network.
Data Beacon Rate
(DTIM):
Enter a value between 1 and 255 for the Delivery Traffic Indication Message (DTIM). A DTIM is a countdown informing
clients of the next window for listening to broadcast and multicast messages
Fragment Threshold:
This specifies the maximum size of a packet during the fragmentation of data to be transmitted. If you set this value too
low, it will result in bad performance.
RTS Threshold:
When the packet size is smaller than the RTS threshold, the wireless router will not use the RTS/CTS mechanism to
send this packet.
AP Isolation:
This feature allows you to isolate clients on your wireless network. To enable communication between the wireless
clients connected to your MyWay, select Disabled. To terminate the communication between the wireless clients,
please choose Enabled.
TX Power:
This determines the output power of the antenna
WMM Capable:
WMM (WiFi MultiMedia) if enabled, supports QoS for experiencing better audio, video and voice in applications
WMM Parameters:
Click on the WMM Configuration button to configure the WMM parameters
Broadcast Network
Name (SSID):
Select ‘Disabled’ to hide the SSID of your MyWay. If disabled, other people will not be able scan and detect this
product’s SSID.
Click Apply to save the settings.
Summary of Contents for MyWay YMLO-3G8WV
