NetComm MyWay – 3G WiFi Router with Voice User Guide
YMLO-3G8WV
28
www.netcomm.com.au
5.3 Wireless Settings
5.3.1 Basic
This page allows you to define the basic wireless settings for the MyWay.
Radio On/Off:
On by default. Changing this option to OFF will turn OFF the wireless functionality on the MyWay and you will not be able to connect to
your MyWay wirelessly.
Network Mode:
You can select which wireless standards are able to connect to your wireless network:
11b/g mixed mode:
Both 802.11b and 802.11g wireless devices are allowed to connect to your MyWay.
11b only:
Select this if all of your wireless clients are 802.11b.
11g only:
Select this if all of your wireless clients are 802.11g.
11/b/g/n Mixed mode:
Select this if 802.11b and 802.11g and 802.11n wireless devices are in your network.
Network Name (SSID):
The SSID (Service Set Identifier) is the name of your wireless network. Use a unique name to identify your wireless device so
that you can easily connect to it from your wireless clients. This field is case sensitive and can be up to 32 characters. You
should change the default SSID for added security.
Frequency (Channel):
This setting configures the frequency that the Wireless Radio uses for wireless connectivity. Select one channel that you wish
to use from the drop down list.
WDS Mode:
WDS (Wireless Distribution System) is a system that enables the wireless interconnection of access points, and allows a
wireless network to be expanded using multiple access points without a wired backbone to link them. Each WDS Access
Point needs to be set with the same channel and encryption type.
Click ‘Apply’ to save the settings.
Summary of Contents for MyWay YMLO-3G8WV
