Netafim NLC-100SH, Installation & Troubleshooting Manual

Page: 34 / 82

NLC ‐ 100SH Installation and troubleshooting
34
The NLC can accept input from an external rain sensor or a tipping rain
bucket, and react in three ways:
• Simply stop irrigating if it rains at all (works with sensors and tipping
rain bucket.)
• Stop irrigating if the rain level exceeds a certain threshold (works
with sensors and tipping rain bucket.)
• Adjust irrigation based on the amount of rain (only works with a
ripping rain bucket.)
ET GND Rain GND Flo
w
GND V-
Au
x
GND
MV BO1 BO2 NOM
COM COM
- -
M204 M203 M202 M205
Important! Be aware of the polarity when you connect devices
to the NLC: Connect plus to plus and minus to minus or you
won't see the expected behavior from the connected devices.
Note: In a master/slave setup you do not need a rain sensor
connected to all slaves ‐ the master can simply send out alarms
to all slaves instead.