Netafim NLC-100SH, Installation & Troubleshooting Manual

Page: 33 / 82

NLC ‐ 100SH Installation and troubleshooting
33
This way you don't have to exit AUTO mode to check the values.
Connecting a Rain Sensor
You can connect a rain sensor (pulse or switch) to the NLC via the grey
terminals labeled "Rain":
Tip: If you are running in AUTO mode and want to check the
current accumulated values, you can simply push the WATER
BUDGET button and you'll skip right to the above display. You
exit back by pushing the WATER BUDGET button again.
Note: To make sure that the ET device works properly, you have
to wait for the device to return pulses. This will typically happen
the next day.