Netafim NLC-100SH, Installation & Troubleshooting Manual

Page: 20 / 82

NLC ‐ 100SH Installation and troubleshooting
20
For decoders
For master valve
1 Push the Prog button
once. The ST LED will be lit.
2 Manually activate the
desired station on the
controller for at least 1
sec. For example, activate
station 1 to assign id 1 to
the decoder. Proceed to
the next decoder.
1 Push the Prog button
twice. The MV LED wil be
lit.
2 Activate any station
(connected to 3D) on the
controller for at least 1 sec
to assign the decoder as
master valve.