Net2Phone 2-Port Gateway, User Manual

Page: 49 / 89

2-Port Gateway User’s Guide
43
From this page, you can enter all your Net2Phone
account information, including:
??
Enable Incoming Call check box –
Allows you to select the phone port to
allow incoming calls from other
Net2Phone devices
Note : If you are sharing a multi-user
account on both ports, you can only
check Enable Incoming Call on one
port at a time. In other words, both ports
cannot accept incoming calls from other
devices at the same time if they are
sharing the same account number.
??
Account 1/Account 2 – Allows you to
enter your Net2Phone account
number(s)
??
PIN – Allows you to enter your PIN
number
??
Frames Sent Per Packet – Allows you
to adjust the frames per packet on sent
data to correct poor voice quality on
calls
??
Call Send Time Out – The amount of
time after you finish dialing before the
call will be sent to the Net2Phone
platform; the default time is set to 4
seconds
Note : You can also press # to initiate
the call immediately.