Net2Phone 2-Port Gateway, User Manual

Page: 13 / 89

2-Port Gateway User’s Guide
7
2. Getting Started
Overview
The Getting Started section details the hardware
requirements for proper installation of the 2-Port
Gateway, as well as instructions for connecting the
2-Port Gateway to your broadband connection, your
PC, and your phone lines. This section also
describes how to obtain an IP address, if needed, for
use in configuring the 2-Port Gateway.
Hardware Requirements
To use the 2-Port Gateway, you will need:
??
One A/C power adapter (included)
??
A broadband Internet connection, such as a
DSL or cable modem, a T1 line, etc.
??
One Net2Phone multi-user account number
and PIN on each port, or one single-use
Net2Phone account per port (available from
your distributor)
??
A PC workstation with any recent Web
browser, connected to the
LAN port to
configure the device
??
If your WAN uses static IP addresses, you
will also need: an IP address, Netmask, and
gateway address for the 2-Port Gateway (all
available from your broadband service
provider)