Net Insight Nimbra 300 Series, User Manual

Page: 37 / 100

Element Manager User’s Manual Nimbra OneSerie Maintenance
•
35
©2006 Net Insight AB, All rights reserved
1. Click on the Maintenance menu item. Then click on Software. The
Maintenance|Software, Figure 28 will appear.
Figure 28. Maintenance, Software page
The table shows both of the software images stored in the unit. When powering
up the unit the primary image is loaded and will appear as running. The
following information is shown:
•
Image: Displays the images as. The marker shows the image that will boot
next time the unit restarts.
•
Name: Shows the name of the image.
•
Version: Shows the version of the software.
Uploading images:
If a new image should be uploaded and there’ s already two images, one of them
must be deleted, refer to section Deleting images. To upload an image file to the
unit, use the following procedure:
1. Click on the Upload image button. A standard File Open dialogue box
appears. Select the desired filename and click on the OK button.
2. The Confirm uploaded image page, Figure 29, appears.
Figure 29. Confirm uploaded image page
3. If the image is to be installed as the active image, tick the Default
checkbox. The recommendation is to not install the image as default
instead swap the images after a successful installation of the new image.
Figure 30. Confirm uploaded image page
4. Click OK. The Maintenance|Software page, Figure 28, will reappear
with the new image displayed in the table.