36
•
Maintenance
Element Manager User’s Manual Nimbra OneSerie
©2006 Net Insight AB, All rights reserved
Swap images
1.
Click on the Maintenance menu item. Then click on Software. The
Maintenance|Software, Figure 28 will appear.
Figure 31. Maintenance, Software page
The table shows both of the software images stored in the unit. When powering
up the unit the primary image is loaded and will appear as running. The
following information is shown:
•
Image: Displays the images as. The marker shows the image that will boot
next time the unit restarts.
•
Name: Shows the name of the image.
•
Version: Shows the version of the software.
Swap images:
2.
Click on the Swap images button and the images are swapped.
Deleting images
Note:
If the primary image is deleted, the next image (the secondary
image) in the flash memory will become the new primary image.
Note that the running image will not be affected until the unit is
restarted.
1.
Enter the Maintenance|Software page according to the previous section.
The Maintenance|Software page will appear.
2.
Click on the name of the image to be deleted in the Name column. The
Software Edit page,
3.
Figure
32
, will appear.
Figure 32. Software Edit page
4.
Click on the Delete button. The Maintenance|Software page, Figure 28,
Summary of Contents for Nimbra 300 Series
Page 1: ...Element Manager User s Manual Nimbra One Nimbra 300 series Nimbra 600 series NimOS GX4 0 3...
Page 8: ......
Page 16: ......
