10
P62E 3E–7E
oPERation shoRtcUts
P62E 3E, hoME MoDE shoRtcUt.
enables the use of
to enter Home
mode.
to program, press P62e 3e then press 3e to
toggle the option on and off.
P62E 3E oFF: Home Mode shortcut disabled.
(low Battery light oFF)
P62E 3E on: Home Mode shortcut enabled.
(low Battery light oN)
(P62E 7E must be OFF when the RKP is used
with D24 V1.1 and earlier).
P62E 4E, Panic shoRtcUt.
enables the use of
to send a
Panic alarm.
to program, press P62e 4e then press 4e to
toggle the option on and off.
P62E 4E oFF: Panic shortcut disabled
(low Battery light oFF)
P62E 4E on: Panic shortcut enabled
(low Battery light oN)
(The Panic Alarm is transmitted as RKP User
Code 1).
P62E 5E, shoRtcUt aRMing.
enables the use of
to arm the
panel.
to program, press P62e 5e then press 5e to
toggle the option on and off.
P62E 5E oFF: shortcut arming disabled
(low Battery light oFF)
P62E 5E on: shortcut arming enabled
(low Battery light oN)
(Shortcut Arming is transmitted as RKP User
Code 1).
P62E 7E, D24 oPtion.
this option sets the radio keypad to emulate a
3 button Radio Key.
It is used to enable the keypad to be used with
panels such d24 V1.1 and earlier that don't
accept 4 button radio keys.
In 3 button mode, the auX buttons will not
work.
to program, press P62e 7e then press 7e to
toggle the option on and off.
P62E 7E oFF: 3 button operation disabled
(low Battery light oFF)
P62E 7E on: 3 button operation enabled
(low Battery light oN)
(P62E 7E must be ON when the RKP is used
with D24 V1.1 and earlier).
P97E, FactoRy DEFaULts
Press P97e in Installer Program mode to clear
all options and restore factory defaults.
this also clears all user codes and the installer
code.
P98E, cLEaR UsER coDEs
Press P98e in Installer program mode to clear
the user codes 1–15.
all codes are cleared. user Code 1 is restored
to 123. the installer code is not affected.
P99E, PRogRaM thE instaLLER
coDE
the Installer Code can be 3–6 digits in length.
to program the Installer Code:
P 99 e [New code] e [New code] e
