manualshive.com logo in svg

Ness RKP, Installer Manual

Share
Download
Ness RKP Installer Manual Download Page 12

12

sPecIfIcatIons

dimensions ............................... 90W x 135H x 27d mm (with lid closed).

Compatibility ............................. 100-200 Ness Radio Interface. 

100-187 Ness 1ch standalone Receiver. 
100-666 Ness MCR receiver.

Keypad functions ...................... arming by user Id 

disarming by user Id 
Home mode  
Panic alarm 
aux 1 (to d8 & d16 panels) 
aux 2 (to MCR Receiver)

audible indicator ....................... onboard beeper for feedback: keypress, valid command, error.

Visual indicators  ....................... ValId led: indicates program modes, valid signal. 

loW BatteRy led: indicates RKP low battery, option enabled (pro-
gram mode).

Battery ....................................... 9V lithium (ultralife u9Vl)

Quiescent current draw ............ 11µa

Radio transmitter ....................... saWR stabilised

Radio frequency ........................ 304MHz

transmit power.......................... 100µW PeP

When used with 
the 100-200 Radio 
Interface

Summary of Contents for RKP













Reviews:

No comments

Brands by name

Popular brands

Load more brands