manualshive.com logo in svg

Ness Pro 16/8, User Manual, Page: 17 / 142

Share
Download
Ness Pro 16/8 User Manual Download Page 17

17 

 

 

Identifying External Components 

Please refer to the text and diagrams below to identify all external components and 
accessories of the PRO 16/8 RAID Digital Video Recorder. 

 

Front View 

 

 

 

 

Figure 1-1: Front View of the PRO 16/8 RAID DVR 

1. 

Front Doors 

The system is completely enclosed. Opening the doors, by unscrewing the thumb 
screws, will reveal 10 hard disk drive bays. 

 

Front Inside View  

Please refer to 

Figure 1-2 

and the descriptions that follow to identify the 

components on the front side of the digital video recorder. 
 
 

 

 

Figure 1-2: Front Inside View of the PRO 16/8 RAID DVR 

1. 

Removable HDD Tray 

The fifteen metal HDD trays enable a secure fit for the HDD and the air ventilation 
holes in front ensure that air flows to the HDD thereby cooling off the system.

  

2. 

System LED Indicators 

 

1. 

2. 

3. 

4. 

5. 

6. 

7.

8.

Un-screw to 
open the door 

Un-screw to 
open the door 

(Power, Fan, Thermal)

Summary of Contents for Pro 16/8















































































































































Reviews:

No comments