Ness IQ-MDVR-8
25
METADATA CAPTURE: metadata information, it will create a black box file in HDD when you setup this switch as
ON. The metadata mainly include GPS info, event info, temperature, inertia sensor info and so on, and you can
analysis the metadata file in Ceiba software, you will get the value chat with the corresponding video files.
SD CARD TYPE: For IQ-MDVR, SD card is used for mirror recording. This means that the hard disk and SD card
can recording at the same time with same frame, same resolution, same image quality. The
main purpose for mirror recording is: when the hard disk is broken (like accident happens) you
can still get the video files in the last minute from the SD card. IQ-MDVR can provide 2
kinds of mirror recording internal and external. Internal means that we have the SD card slot
inside of MDVR device and you just need to insert the SD card in the slot and ENABLE the
switch for mirror recording on the MDVR GUI menu. External means that you need to put the
SD card in the external fireproof box which can be connected to MDVR by USB cable. This
fireproof box is specially design for the vehicle accident (like fire) and the maximum
temperature can be 500 Celsius degree (can stand 15 minutes)
MIRROR REC.TO SD CARD: The enable switch for mirror recording
HDD/SD OVER WRITE: To make the HDD or SD card overwrite when there is only 4GB or 1G spare space.
ON: when hard drive space less than 4G, according to “First in first out” rule, system will start to delete the
earliest record files till HDD space equal or over 15G (except the alarm file which in locked time). For
SD card, if the space less than 1G, it will start to delete the files until the space more than 4G.
OFF: Device will stop recording when hard drive space is full (less than 2G), you must replace an HDD or
delete recording file manually, then it will start to record.
LOCKED FILE RETENTION (DAY): For the MDVR video files you can lock or unlock them. Lock function is only
for the event (alarm files) as they are very important. If the file is locked then it cannot be deleted by
the HDD/SD overwrite function in the retention days. When the retention day is expired, the locked
files will be unlocked automatically and deleted. Locked recording file save time can be configured to
be 7, 10, 15, 20, 30, 45 days. During the same time, the locked recording file won’t be deleted. Once
pass lock time, the recording file LOCK identifier will be from L to U, and then can be deleted
automatically by overwrite function.
PRE-RECORDED SWITCH: ON/OFF, ON means open the function of pre-recording, OFF means not. If you
need to setup pre-recording function, you must open this switch and also setup the time for
pre-recording in this menu as well.
ALARM PRE-REC TIME
（
（
（
（
1-60
）
）
）
）
MIN: Pre-record time setting is from 1 to 60 minutes. For example: If the setting
for pre-record is 30min, when alarm trigger at 10:30, then the record file
start from 10:00 to 10:30 will pack as alarm record.
B) OSD OVERLAY
On QUAD view, you can please press
【
Enter
】
on remote control to show MDVR working status as below screen.
This screen will show all the important working information for the MDVR including sensor, 3G/GPS/WIFI signal
and connection, firmware version, MCU version, SIM dialed up status etc…
But the precondition for this OSD is you must setup the OSD overlay menu to select which information you want to
display on this screen.
