Ness IQ-MDVR-8
18
For TIMER type, if the setting for boot up time is 6:00:00 and shut time is 11:00:00, this means that the
MDVR only work from 6:00~11:00am every day and after 11:00 the MDVR unit will shut down
automatically. If you want to change the different type (like IGNITION, IGNITION or TIMER), please
finish this change operation in 5 minutes.
IDLE TIME (SEC): The time for the operation interface switching to the QUAD view. If the user
does not make some operation for some time, the system will switch to the QUAD
view automatically.
EVENT FILES AUTO-EXPORT (USB): When is switch is ON, you can back up all the alarm record files on
that day by press F1 on remote control. (Make sure the USB space is enough).
OUTPUT MODE: This is the output mode for monitor. There are 4:3 and 9:6 two options,
TRANSPARENCY: Setup the brightness for the screen display as you want.
Scroll to
【
SAVE
】
to make the setting valid
C) REGISTER INFO
UNIT S/N: The series number for MDVR. One MDVR has only one S/N. This number is read from special
encrypted chip.
UNIT ID: Device ID. Use the NUMERIC keypad to enter the system ID from 00000 to 99999. This ID is used
when logging in to the unit (if security is enabled, set as yes).
COMPANY NAME: The name of company. Press the arrow key on the remote control and highlight this
option and then input the name of the company.
VEHICLE NO.: The number of the vehicles.
DRIVER/ROUTE NAME: The driver’s name and the route name
DEVICE ID: This is very important for the message server of CMS, Ceiba, and ADS. Only this number can
be recognized by message server.
Remark: when you connect MDVR to PC software, make sure vehicle NO and DEVICE ID is not blank,
otherwise, it can’t connect to message server.
Scroll to
【
SAVE
】
to make the setting valid.
