5000 Series Dialler
Page 5
SOFTWARE DATE, INSTALLER PROGRAM ACCESS CODE.
P30E
Code E Code E
Pressing P30E will display the release date (month and year only)
of the Software version currently installed in the Dialler.
To program your secret Installer Access Code, enter it twice as shown above
(ie. after the display of the date). The only constraint for this code is that
it must always be 4 digits in length. For security reasons, it is not displayed
at any time.
See page 4 regarding the use of this Installer Access Code. There
is no default value for this code; ie. it is blank.
SET ALL OPTIONS to DEFAULT VALUES.
P98E
Press P98E at any time in Installer Program mode to clear the Installer Access Code,
the telephone numbers and the Client Account Number, as well
as set all the other programming options to their default values.
Note :
If you need to reprogram the Dialler and do not know the
Installer Access Code, you must use P98E to clear everything
as above before you can gain access to the programme options.
PRIMARY TELEPHONE NUMBER.
P31E
Telephone no. E
The Primary Telephone number may be up to 18 digits in length. If
it is necessary to dial out through a PABX, you may need a PAUSE
within the telephone number to slow down the dialling. To create a
PAUSE, see page 4. The default telephone number is a single digit 0.
SECONDARY TELEPHONE NUMBER.
P32E
Telephone no. E
The Secondary Telephone number may be up to 18 digits in length and
defaults to 0.
EXTRA TELEPHONE NUMBER.
P33E
Telephone no. E
The Extra Telephone number may be up to 18 digits in length and
defaults to 0.
DIALLER #1 and #2 CLIENT ACCOUNT NUMBERS.
P34E number E
Enter the 4 digit Client Account Number as above. There are no
other restrictions on what this number can be. The default is 0.
