5000 Series Dialler
Page 7
TYPE of DIALLING.
P37E option E
1 =
Use Decadic or Touch-Tone dialling depending on the type of
dial-tone received. (First call only).
2 =
Use Decadic dialling only.
3 =
Use Touch-Tone dialling only.
4 =
Use Touch-Tone dialling only and dial using Telecom
Australia's EASY DIAL facility.
Only one of the above options is allowed and the default is 1.
5 =
Dial as above even if a Dial tone is not received.
6 =
Use New Zealand style Decadic pulses.
Options 5 and 6 may be chosen in addition to the other options.
7 =
Only transmit in Ademco Extended Format
TIME to WAIT for ACKNOWLEDGE TONE BEFORE REDIAL.
P38E time E
This option defaults to 15 seconds and should rarely need to be changed.
It may be set from 10 to 25 seconds.
MAXIMUM NUMBER of DIAL-OUT ATTEMPTS.
P39E number E
This option defaults to 6 dial attempts (the maximum allowed by Telecom Australia)
and should rarely need to be changed. It may be set from 1 to 6 attempts.
OUTPUT CONTROL and INDICATION OPTIONS.
P40E option E
1 =
Trigger the siren/strobe for the Reset time on a Line Fault.
2 =
Trigger the siren/strobe for the Reset time on no Kiss-off.
Note: triggering is via the Keyswitch/Panic input of the Panel.
3 =
When the Kiss-off tone is received. beep the siren 3 times.
4 =
When the Kiss-off is received. turn the strobe on for 3 seconds.
5 =
Turn the LINE/EXPAND indicator on during a call (page 2).
6 =
Allow the client to program the Medical Alarm (P53E).
7 =
Allow the client to program the Extra number (P33E).
8 =
Trigger the siren/strobe for the reset time on a line fault only when armed.
(Must be used with function 1. ie. With 1 and 8 lights on, line fault will
cause an alarm only when armed.)
None, one or all of the above options may be chosen and the default is option 5.
