manualshive.com logo in svg

Ness 104-460 Auto-IP NVS, User Manual

Share
Download
Ness 104-460 Auto-IP NVS User Manual Download Page 9

NVS User’s Manual

 

8 

2.3   

Rear Panel Connectors 

There are various connectors on the rear panel for the NVS installations. The 
connectors are described as the following. 

 

 

Power Jack 

Connect the power supply cord shipped with the NVS. 
 

NOTE:

 Use of other power supply cords may 

cause overloading. 

 

 

 

e-SATA (Reserved) 

Users can connect an e-SATA storage device via this 
port to expend HDD capacity of the NVS. 
 

 

Uplink 

Connect to a LAN port via a RJ-45 cable and the NVS 
are connected to the Ethernet. Then users can connect 
to the NVS via the internet browser. 

 

 

 

LED Indication 

Each IP camera has two corresponding LEDs: 

1.  The lightened orange LEDs represent the IP camera 

is connected and power is supplied via PoE. When a 
LED is off, either the IP camera is not connected or 
its power supply is separately connected. 

2. 

The blinking green LEDs represent data 
transmission goes from the IP cameras to the NVS. 
When a LED is not on, that means the IP camera is 
not connected.

 

 

 

 

RJ-45 PoE 

The NVS provides RJ-45 ports that support 
Power over Ethernet (PoE). IP cameras can 
be connected via just one Ethernet cable, 
without the need of power cable connection.

 

 

Summary of Contents for 104-460 Auto-IP NVS






































Reviews:

No comments

Brands by name

Popular brands

Load more brands