NVS User’s Manual
18
4.4 Live
Monitoring
Users can view Live video from the cameras connected to the NVS by clicking
<Live> button on the main window toolbar. While viewing Live video, users
can perform Live monitoring operations such as display mode, IP dome
camera control, and digital zoom. Refer to the following sections for details.
4.4.1
Display Mode
The remote monitoring software provides users different display modes such
as 1x1, 2x2, and 3x3 split windows. Click one of the display buttons in
MODE
section to view 2x2 and 3x3 display mode. To view certain camera in 1x1
display mode, either double-click on the preferred camera grid, or click on the
corresponding CAMERA button.
4.4.2
IP Dome Camera Control
The remote monitoring software allows users to control and configure IP
dome cameras remotely. When an IP dome camera is connected, its
CAMERA button will be displayed as a dome icon. Click on the CAMERA
button to view the camera in 1x1 display mode, and the dome camera control
panel will be displayed. The items on the Dome Camera Control Panel are
described as the following.
Auto Focus (A.F.)
Click on it and the focus of the camera will be automatically adjusted to show
a clearer image.
Set/Go Preset & Run Tour (•
)
The remote monitoring software allows its users to store up to 255 preset
points according to the allowance of the supported dome cameras. Use
Direction buttons to pan/tilt dome camera to an appropriate position. Then
click this button, select <Set Preset> and choose a preferred number from the
pull-down list. The preset point is named as the selected number.
Click this button, select <Go Preset> and choose a preferred number from the
pull-down list to call the preset point for viewing.
Click this button, select <Run Tour> and the dome camera will start the tour
set previously at the dome camera side.
