R E P A I R
Making fast a shaky extraction head
After impact stress, falling down, holding the extraction head and lifting the machine etc.
the latch connection to the housing main part can become loose.
1. Follow partial disassembly (see page 26).
2. Fasten 2 screws (T) on the inner side of the housing main part.
3. Check if extraction head is steady now.
The neck of the
extraction head can
be mounted on the hous-
ing main part with 2
additional screws.
T
Use only torx
screws 2.9x12 mm
for thermoplastics.